Gig Harbor Concrete Services
Gig Harbor Concrete specializes in high-quality concrete services including:
-
Concrete Driveways & Walkways
-
Formwork and reinforcing steel
-
Grading and Excavation
-
Custom Concrete
-
Decorative Concrete
-
Concrete slabs on grade
-
Concrete Driveway Repair
-
Stamped Concrete, Exposed Aggregate, Sand Finish Concrete
-
Concrete Patios
-
Concrete Hardscape, Flatwork
-
Concrete Foundations
-
Concrete Curbs and Gutters
-
Block walls (CMU), Retaining Walls
-
Monolithic Concrete and Structural Concrete
-
Concrete Foundation Repair
-
Concrete Pool decks and Copings
-
Fountains
-
Fireplace and BBQ's
-
Caissons (Piles)
-
Flagstone, Natural and Artificial Ledger Stone Veneer
General Information about Quality & Workmanship of Concrete
Cracks ---- Washington Contractors Board requires contractors to replace any concrete that cracks the width of a nickel or wider within four years. Concrete naturally cracks, which is why control joints are placed in the concrete. It gives the concrete a place to crack and not be so readily noticeable. Code requires us to pour a minimum of 3 ½ inches of concrete @ a 5 sack 2500 psi rating. We pour 4 inches thick using a 6 1/2 sack 4500 psi mix to give you stronger concrete to reduce the chance of cracking. We also cut our control joints closer than code requires which will relieve more stress from the concrete.
Drainage ---- All patios are required to have a slope draining away from the house at no more than a 2% sloping grade. When a patio has a cover, it is typical to only pour a 1% sloping grade. We have found out through experience that a 1% sloping grade will sometimes leave a puddle along the edge or close to it and recommend always having a 2% sloping grade.
Thickness ---- As mentioned before, code is 3 ½ inches for concrete, some contractors will even skimp and pour only 3 inches. However, Rooster Concrete always pours a true 4 inches thick, which provides about 25% more strength against cracks. We NEVER cut corners to increase profit!